Weinmann OXYWAY Fix I Service Manual page 62

Repairs to OXYWAY Fix I, OXYWAY Fix III
13 Repairs to OXYWAY Fix I, OXYWAY Fix III
62 EN OXYWAY
Back
13.1 General instructions
• When carrying out repairs, please refer to the instructions for use
• Always ensure that the workstation is kept clean and tidy.
• Only carry out the repairs described in this service manual.
• Always carry out a final inspection after each repair job
• Only use original spare parts from WEINMANN Emergency.
• You will find the necessary auxiliary equipment in the
• The item numbers in this chapter are identical to the item numbers
• Use a container with compartments for the screws and washers.
• Place all the necessary tools ready before starting work.
13.2 Repair steps
The flow charts in this chapter provide an overview of the repair steps
that are necessary in order to replace a particular part (shown in gray).
Forward
and the service manual. In particular, you should observe the safety
information contained in the instructions for use.
(see "7 Final inspection OXYWAY Fix I, OXYWAY Fix III", page
"Required auxiliary equipment" chapter
(see "21 Required auxiliary equipment", page
in the "Spare parts" chapter
page 234).
Contents Previous page
251).
(see "18 Replacement parts",
Next page
22).