Weinmann OXYWAY Fix I Service Manual page 194

Repairs to OXYWAY Fine I
263
194 EN OXYWAY
Back
1. Dispose of the spring for the lifting pin 263.
16.21.2 Fitting the spring for the lifting pin
1. Pick up the spring for the lifting pin 263.
263
2. Fit the piston 261
3. Fit the spring for the piston 262
4. Fit the assembly housing cover 275
5. Fit the driving plate 266
6. Fit the multistep flow selector 267
7. Fit the hexagon nut 268
8. Fit the cover for the multistep flow selector 269
16.22 Replacing the lifting pin with
shoulder
Required tools Pliers
16.22.1 Removing the lifting pin with shoulder
Requirement • The cover for the multistep flow selector 269 has been removed
• The hexagon nut 268 has been removed
• The multistep flow selector 267 has been removed
Forward
(see "16.20.2 Fitting the piston", page
(see "16.19.2 Fitting the spring for the piston", page
(see "16.18.2 Fitting the assembly housing cover", page
(see "16.17.2 Fitting the driving plate", page
(see "16.16.2 Fitting the multistep flow selector", page
(see "16.15.2 Fitting the hexagon nut", page
(see "16.14.2 Fitting the cover for the multistep flow selector",
page 187).
(see "16.14.1 Removing the cover for the multistep flow selector",
page 187).
(see "16.15.1 Removing the hexagon nut", page
(see "16.16.1 Removing the multistep flow selector", page
Contents Previous page
193).
192).
190).
189).
188).
188).
187).
188).
Next page