Weinmann OXYWAY Fix I Service Manual page 119

Back Forward
14.29 Replacing the O-rings in the
multistep flow selector
14.29.1 Removing the O-rings from the multistep flow
selector
Requirement • The multistep flow selector assembly 179 has been removed
(see "14.13.1 Removing the multistep flow selector assembly",
page 98).
• The spring for the piston 174 has been removed
(see "14.14.1 Removing the spring for the piston", page
• The piston 173 has been removed
(see "14.16.1 Removing the piston", page
• The multistep flow selector assembly 179 has been disassembled
(see "14.17.1 Disassembling the multistep flow selector assembly",
page 101).
• The cover assembly 180 has been disassembled
(see "14.27.1 Disassembling the cover assembly", page
1. Dispose of the large O-ring 172.
2. Dispose of the small O-ring 171.
14.29.2 Fitting the O-rings in the multistep flow selector
1. Pick up the large O-ring 172.
2. Pick up the small O-ring 171.
3. Assemble the cover assembly 180
(see "14.27.2 Assembling the cover assembly", page
4. Assemble the multistep flow selector assembly 179
(see "14.17.2 Assembling the multistep flow selector assembly",
page 102).
5. Fit the piston 173
6. Fit the spring for the piston 174
(see "14.14.2 Fitting the spring for the piston", page
7. Fit the multistep flow selector assembly 179
(see "14.13.2 Fitting the multistep flow selector assembly",
page 98).
Contents
Repairs to OXYWAY Fast I, OXYWAY Fast I+, OXYWAY Fast III
(see "14.16.2 Fitting the piston", page
Previous page
99).
100).
113).
114).
101).
99).
OXYWAY EN 119
Next page