Weinmann OXYWAY Fix I Service Manual page 167

Back Forward
• The cover assembly 234 has been disassembled
(see "15.30.1 Disassembling the cover assembly", page
1. Dispose of the multistep flow selector 213.
15.34.2 Fitting the multistep flow selector
1. Pick up the multistep flow selector 213.
2. Assemble the cover assembly 234
(see "15.30.2 Assembling the cover assembly", page
3. Assemble the multistep flow selector assembly 233
(see "15.20.2 Assembling the multistep flow selector assembly",
page 149).
4. Fit the piston 226
5. Fit the spring for the piston 227
(see "15.17.2 Fitting the spring for the piston", page
6. Fit the multistep flow selector assembly 233
(see "15.16.2 Fitting the multistep flow selector assembly",
page 145).
15.35 Replacing the union nut
15.35.1 Removing the union nut
Requirement • The multistep flow selector assembly 233 has been removed
(see "15.16.1 Removing the multistep flow selector assembly",
page 144).
• The spring for the piston 227 has been removed
(see "15.17.1 Removing the spring for the piston", page
• The piston 226 has been removed
(see "15.19.1 Removing the piston", page
• The multistep flow selector assembly 233 has been disassembled
(see "15.20.1 Disassembling the multistep flow selector assembly",
page 148).
• The cover assembly 234 has been disassembled
(see "15.30.1 Disassembling the cover assembly", page
1. Dispose of the union nut 222.
15.35.2 Fitting the union nut
1. Pick up the union nut 222.
2. Assemble the cover assembly 234
(see "15.30.2 Assembling the cover assembly", page
3. Assemble the multistep flow selector assembly 233
(see "15.20.2 Assembling the multistep flow selector assembly",
page 149).
4. Fit the piston 226
5. Fit the spring for the piston 227
(see "15.17.2 Fitting the spring for the piston", page
Contents
Repairs to OXYWAY Fast II
(see "15.19.2 Fitting the piston", page
147).
(see "15.19.2 Fitting the piston", page
OXYWAY
Previous page
159).
161).
148).
146).
146).
159).
161).
148).
146).
EN 167
Next page