Weinmann OXYWAY Fix I Service Manual page 81

Back Forward
13.17.2 Fitting the O-ring in the contents indicator
1. Position the O-ring 102 on the connecting screw on the contents
indicator 100.
2. Fit the contents indicator 100
(see "13.16.2 Fitting the contents indicator", page
3. Fit the threaded locking pin 101
(see "13.15.2 Fitting the threaded locking pin", page
4. Fit the spring for the piston 111
(see "13.13.2 Fitting the spring for the piston", page
13.18 Replacing the housing cover
13.18.1 Removing the housing cover
Requirement • The spring for the piston 111 has been removed
(see "13.13.1 Removing the spring for the piston", page
• The piston 110 has been removed
(see "13.14.1 Removing the piston", page
1. Dispose of the housing cover 112.
13.18.2 Fitting the housing cover
1. Pick up the housing cover 112.
2. Insert the piston 110 into the housing cover 112
(see "13.14.2 Fitting the piston", page
3. Fit the spring for the piston 111
(see "13.13.2 Fitting the spring for the piston", page
4. Attach the label 116
Contents
Repairs to OXYWAY Fix I, OXYWAY Fix III
78).
78).
(see "13.3.2 Attaching a label", page
OXYWAY
Previous page
80).
79).
77).
77).
77).
66).
EN 81
Next page