Weinmann OXYWAY Fix I Service Manual page 193

Back Forward
16.20.2 Fitting the piston
1. Clean the inside of the assembly housing cover 275 with a clean,
dry cloth.
2. Insert the spring for the lifting pin 263 into the piston 261.
3. Insert the piston 261 with spring for the lifting pin 263 into the
housing cover.
4. Fit the spring for the piston 262
(see "16.19.2 Fitting the spring for the piston", page
5. Fit the assembly housing cover 275
(see "16.18.2 Fitting the assembly housing cover", page
6. Fit the driving plate 266
(see "16.17.2 Fitting the driving plate", page
7. Fit the multistep flow selector 267
(see "16.16.2 Fitting the multistep flow selector", page
8. Fit the hexagon nut 268
(see "16.15.2 Fitting the hexagon nut", page
9. Fit the cover for the multistep flow selector 269
(see "16.14.2 Fitting the cover for the multistep flow selector",
page 187).
16.21 Replacing the spring for the lifting
pin
16.21.1 Removing the spring for the lifting pin
Requirement • The cover for the multistep flow selector 269 has been removed
(see "16.14.1 Removing the cover for the multistep flow selector",
page 187).
• The hexagon nut 268 has been removed
(see "16.15.1 Removing the hexagon nut", page
• The multistep flow selector 267 has been removed
(see "16.16.1 Removing the multistep flow selector", page
• The driving plate 266 has been removed
(see "16.17.1 Removing the driving plate", page
• The assembly housing cover 275 has been removed
(see "16.18.1 Removing the assembly housing cover", page
• The spring for the piston 262 has been removed
(see "16.19.1 Removing the spring for the piston", page
• The piston 261 has been removed
(see "16.20.1 Removing the piston", page
Contents
Repairs to OXYWAY Fine I
189).
188).
192).
OXYWAY
Previous page
192).
190).
188).
187).
188).
188).
189).
191).
EN 193
Next page