Weinmann OXYWAY Fix I Service Manual page 13

Assembly
Connecting bolt with hand-screwed connection
(exception: OXYWAY Click)
Disposable filter
Rib filter
(exception: OXYWAY Click)
Multistep flow selector
(exception: OXYWAY Fix I)
Multistep flow selector with orifice plate
(only OXYWAY Fast I, OXYWAY Fast I+,
OXYWAY Fast II, OXYWAY Fast III, OXYWAY Click)
Piston
(exception: OXYWAY Click)
Spring
(exception: OXYWAY Click)
Contents indicator
(exception: OXYWAY Click)
Flow indicator
(OXYWAY Fine only)
Pressure outlet
(only OXYWAY Fix I, OXYWAY Fast II)
Inhalation outlet
Safety valve
(exception: OXYWAY Click)
Back
1.3.5 Assemblies
The device comprises the following assemblies:
•
Connects the pressure reducer to the oxygen cylinder. Carries the high pressure to the
pressure reducer housing.
Protects against external soiling.
Protects against external soiling.
Used to set inhalation flow.
Used for inhalation flow dosing.
Reduces the inlet pressure to a constant pressure together with the spring.
Reduces the inlet pressure to a constant pressure together with the piston.
Indicates cylinder pressure.
Shows the set inhalation flow.
Connects the pressure reducer with a connected device.
Connects the pressure reducer with connected accessories (e.g., nasal cannulas, masks,
intermediate humidifiers).
Protects against excessively high pressure.
Forward Contents Previous page
Tasks
OXYWAY
Next page
Introduction
EN 13