Weinmann OXYWAY Fix I Service Manual page 233

Back Forward
10.Clamp the cover clamping device 401 onto the housing 320.
11.Tighten the cover clamping device 401 in the vise.
12.Use the open-end wrench to loosen the O
322
from the housing 320 and then remove it.
320
13.Fit the O
(see "17.26.2 Fitting the O
17.28 Replacing the disposable filter
17.28.1 Removing the disposable filter
Requirement • The O
(see "17.26.1 Removing the O
• The housing 320 has been removed
(see "17.27.1 Removing the housing", page
1. Dispose of the disposable filter 300.
17.28.2 Fitting the disposable filter
1. Pick up the disposable filter 300.
2. Fit the housing 320
3. Fit the O
(see "17.26.2 Fitting the O
Contents
sampling point 322
2
sampling point", page
2
sampling point 322 has been removed
2
2
(see "17.27.2 Fitting the housing", page
sampling point 322
2
sampling point", page
2
Previous page
Repairs to OXYWAY Click
sampling point 322
2
231).
sampling point", page 230).
231).
231).
OXYWAY EN
Next page
232).
233