Weinmann OXYWAY Fix I Service Manual page 169

Back Forward
• The piston 226 has been removed
(see "15.19.1 Removing the piston", page
• The multistep flow selector assembly 233 has been disassembled
(see "15.20.1 Disassembling the multistep flow selector assembly",
page 148).
• The orifice plate assembly 235 has been disassembled
(see "15.23.1 Disassembling the orifice plate assembly",
page 153).
1. Dispose of the orifice plate 220.
15.37.2 Fitting the orifice plate
1. Pick up the orifice plate 220.
2. Assemble the orifice plate assembly 235
(see "15.23.2 Assembling the orifice plate assembly", page
3. Assemble the multistep flow selector assembly 233
(see "15.20.2 Assembling the multistep flow selector assembly",
page 149).
4. Fit the piston 226
5. Fit the spring for the piston 227
(see "15.17.2 Fitting the spring for the piston", page
6. Fit the multistep flow selector assembly 233
(see "15.16.2 Fitting the multistep flow selector assembly",
page 145).
15.38 Replacing the slide disk
15.38.1 Removing the slide disk
Requirement • The multistep flow selector assembly 233 has been removed
(see "15.16.1 Removing the multistep flow selector assembly",
page 144).
• The spring for the piston 227 has been removed
(see "15.17.1 Removing the spring for the piston", page
• The piston 226 has been removed
(see "15.19.1 Removing the piston", page
• The multistep flow selector assembly 233 has been disassembled
(see "15.20.1 Disassembling the multistep flow selector assembly",
page 148).
• The orifice plate assembly 235 has been disassembled
(see "15.23.1 Disassembling the orifice plate assembly",
page 153).
1. Dispose of the slide disk 218.
Contents
Repairs to OXYWAY Fast II
147).
(see "15.19.2 Fitting the piston", page
147).
OXYWAY
Previous page
153).
148).
146).
146).
EN 169
Next page