Weinmann OXYWAY Fix I Service Manual page 120

Repairs to OXYWAY Fast I, OXYWAY Fast I+, OXYWAY Fast III
120 EN OXYWAY
Back
14.30 Replacing the housing cover
Required tools Cloth
14.30.1 Removing the housing cover
Requirement • The multistep flow selector assembly 179 has been removed
• The spring for the piston 174 has been removed
• The piston 173 has been removed
• The multistep flow selector assembly 179 has been disassembled
• The cover assembly 180 has been disassembled
1. Dispose of the housing cover 162.
14.30.2 Fitting the housing cover
1. Pick up the housing cover 162.
2. Clean the housing cover 162 from the inside with a dry cloth.
3. Assemble the cover assembly 180
4. Assemble the multistep flow selector assembly 179
5. Fit the piston 173
6. Fit the spring for the piston 174
7. Fit the multistep flow selector assembly 179
8. Attach the label 171
14.31 Replacing the multistep flow selector
14.31.1 Removing the multistep flow selector
Requirement • The multistep flow selector assembly 179 has been removed
• The spring for the piston 174 has been removed
• The piston 173 has been removed
Forward
(see "14.13.1 Removing the multistep flow selector assembly",
page 98).
(see "14.14.1 Removing the spring for the piston", page
(see "14.16.1 Removing the piston", page
(see "14.17.1 Disassembling the multistep flow selector assembly",
page 101).
(see "14.27.1 Disassembling the cover assembly", page
(see "14.27.2 Assembling the cover assembly", page
(see "14.17.2 Assembling the multistep flow selector assembly",
page 102).
(see "14.16.2 Fitting the piston", page
(see "14.14.2 Fitting the spring for the piston", page
(see "14.13.2 Fitting the multistep flow selector assembly",
page 98).
(see "14.4.2 Attaching a label", page
(see "14.13.1 Removing the multistep flow selector assembly",
page 98).
(see "14.14.1 Removing the spring for the piston", page
(see "14.16.1 Removing the piston", page
Contents Previous page
99).
100).
113).
114).
101).
99).
89).
99).
100).
Next page