Carry Out Replacements; Counter - Leibinger JET2NEO Manual

Group 8

8.6.2.2 Carry out replacements

Further more accordant substitutions (numbers, letters or designations) for the date- and
time values can be generated in the functional area <Replacements> to get an operating-
specific display or coding of the specifications.
You will find further information regarding the execution of substitutions in
the chapter Replacements (page 249)!

8.6.3 Counter

Provides bonding of individual programmable counters as well as definition of counter
parameters, font parameters and display options.
Further more accordant replacements (number or letters) can be generated to get a
operating specific display or coding of the specifications.
Attention! For leaving a job, the counter states of integrated job counters
are usually not saved, that means if you call up this job again the counter
states are already again on the start value. If the print should be continued
with the already existing counter states you have to activate the function
<Save counters> in the menu <Main menu> under the functional area
<Job> in advance.
You
entry/Programming in the chapter Save counter states (page 86)!
In the two functional areas <Counter page 1> and<Counter page 2> of the menu you
can define the basic settings of the counters.
Functional area <Counter page 1>
JET2 neo
Job editor
will find further information also in
Functional area <Counter page 2>
Page 225
the group Data
Release R1.12 en