Accident Prevention; Storage And Handling - Leibinger JET3 up Operating Manual

Page 30

3 Accident prevention

The following presentation shows the measures in the event of an accident with ink
and solvent with the danger marking,

3.1 Storage and handling

GENERAL These products must only used at points that are free from open
flames and other ignition sources. Do not use pressure for
emptying – the container is not a pressure vessel. Good household
practice and regular, safe removal of the waste materials restrict
the danger of self-ignition and other risks of fire to a minimum. The
product can charge statically. When pouring from one container to
another use a mass lead. The workers must wear anti-static shoes
and clothing and the floors must be conductive.
STORAGE Observe the marking information. Store at 5 to 25°C in a well
ventilated location at a safe distance from heat and ignition sources
and direct sunlight.
Do not smoke! Do not grant access to unauthorised persons. Open
containers must be properly closed and stored upright in order to
avoid leakage.
Smoking, eating and drinking must be forbidden in the storage and
working areas. Always keep in containers from the same material
as the delivery containers.
HANDLING
The development of combustible or explosive vapour concen-
trations must be prevented and vapour concentrations avoided that
are above the threshold values of the employers liability insurance
association. Keep containers closed tightly.
Keep sources of heat and sparks as well as open flames well away.
Use only spark-free tools. Electrical devices must be protected in
accordance with the corresponding standard.
Avoid contact with the skin and eyes. Do not inhale vapours and
spray mist.
Release R1.06

Accident prevention

Previous warning labels
highly
flammable
Group 3
irritant
JET3up