Figure 18 - Status Field <Product Counter - Leibinger Jet 3 Operating Manual

Group 6
 Display area (4): In this area the printing data of the loaded job which should be
currently printed or loaded is displayed in the WYSIWYG-mode.
 Status field <Printing speed> (5): this indicator shows the current printing speed and
the max. possible printing speed considering the current settings. De-pending on the
selected adjustments in the basic settings the speed is displayed as. m/min or inch/min
 Status field <Product counter> (6): The current value of the production counter(s) is
(are) displayed by this field(s). The fields work also as buttons. By pressing them you
can change or reset the value of the counter(s). Whether there is displayed 1 or 2
product counters depends on the product counter settings. Details can be found in the
respective chapters of this manual.
If a print stop is defined after a pre-defined amount of prints, the value is also shown
in the status field. For better visualization that a pre-defined print stop has been
defined, the field is displayed with a red frame.
This function works with either one or two production counters.
Figure 18
Status field with one production counter – With/without a pre-defined print stop
Status field with two production counters – With/ without a pre-defined print stop
You will find further information also in the chapters Reset Production
counter and Change Production counter as well as in the chapter
Production counter!
 Status field <General> (7): In this field the current time, date, the status of the head
cover and the ink supply are displayed.
Release R2.0
Operation – Elements and procedures
Status field <Product counter>
INFORMATION
Status field <Product counter>
LEIBINGER JET3
Page 68