Contrast Value - Leibinger JET3 User Manual

Group 8

8.4.2 Contrast value

The setting determines the print contrast of the object. The value can be set
between 0 – 7.
To get a contrast increasing of the print out, you have to place several dots on top
of each other (on the same position).
Example 0 = no contrast increasing (single print out)
1 = 2 dots are placed on top of each other
2 = 3 dots are placed on top of each other
.....
7 = 8 dots are placed on top of each other
The set value is shown on the accordant display field.
Figure 97
Contrast
Attention!
only used for complete strokes (vertical dot line). This means that all
further strokes which are placed above or below the attribute setting
are also generated with the contrast additionally to the affected
object.
Example: For a doublespaced font only the lower line is reserved with
As higher the contrast has been set, as lower is the max. printing
speed!
Release R1.03e
Job editor
Display: normal
From the technical side the function <Contrast> can
the attribute „Contrast". The elements of the first line which
are placed above the attribute setting will be also printed
automatically with the attribute "Contrast".
Leibinger
1. Line:
Printer
2. Line:
with contrast
Contrast area
Ink-Jet
LEIBINGER JET3
Page 165