Group 7
7.6.1.1 Save info file
The displayed system information can be swaped out to an external memory device
(USA-stick or SD-CARD).
Figure 84
Save info file
1 – USB-access (connection)
2 – Button <Export>
3 – Message <Info file (Report) saved>
Proceeding:
Plug an USB-Stick or a SD-card reader in the USB-access (1) on the back of the
device.
Press the button <Export> (2).
The data is saved on the connected medium and the Message (3), that the
process has been carried is faded in. The memory happens with the designation
„info_LJ3-("serial number of the printer").txt".
Finally confirm the message with the button <OK> (4).
Comment: If no storage medium (memory device) is connected, the Message (5)
is faded in. Confirm the message with the button <OK> (6).
Connect a memory device and repeat the complete process.
Release R1.03e
Data/Programming
1
3
4 – Button <OK>
5 – Message <Insert storage medium>
6 – Button <OK>
2
4
LEIBINGER JET3
Page 148
5
6