Drawing Tools - Leibinger JET3 User Manual

Group 7

7.5.5.3 Drawing tools

Fugure 70
With the button <Function> you can select the tools to create graphic elements
and you can select (mark) the graphic segments.
Note: The function of the tools refers to the Windows™-drawing tools.
Irrespectively of the set raster size, points are always created with a raster
size 1x1 and lines- and circle elements are created with a raster width 1.
Pos. Drawing tool
2. Selection
3. Dot
4. Line
5. Rectangle
6. Ellipse
7. Row
8. Column (Gap)
Release R1.03e
Data/Programming
1
2
3
4
5
6
7
8
Function
Provides the marking of a created graphic segment for
editing.
Provides the creation of a point.
Provides the creation of a line in the requested length.
Provides the creation of a rectangle or quad in the
requested size.
Provides the creation of a circle or an ellipse in the
requested size.
Generates a (horizontal) line with the total length of the
selected row.
Generates a (vertical) line with the total length of the
selected gap.
1 – Button <Function>
2 – Drawing tool <Selection>
3 – Drawing tool <Dot>
4 – Drawing tool <Line>
5 – Drawing tool <Rectangle>
6 – Drawing tool <Ellipse>
7 – Drawing tool <Row>
8 – Drawing tool <Column>
Graphic editor (Drawing tools)
LEIBINGER JET3
Page 126