Print Function Setup - Olympus OER-Pro Operation Manual

Chapter 6 Other Functions

6.11 Print function setup

180
This section describes the basic setting of the print function. As shown in Table
6.7, there are four options for printing of reprocessing records; "AUTOMATIC
PRINTING", "PRINT LAST", "PRINT TODAY", "PRINT ALL". Reprocessing
records include "Reprocessing Result" and "Error Result". Regarding these
printing function, there are two setup menus as shown in Table 6.8.
Print Function
AUTOMATIC
PRINTING
PRINT LAST
PRINT TODAY
PRINT ALL
Table 6.7
Setup Menu
AUTOMATIC
PRINTING setup
Error Result
Printout setup
Table 6.8
• "Reprocessing Result" is the record provided for a completed
reprocessing process.
• "Error Result" is the record provided when an error is
encountered during a reprocessing process, which result in
an incomplete reprocessing process.
• The print function can print completed reprocessing cycles or
error codes that occur during the reprocessing cycle. It
cannot print the record of completed/incomplete
sub-independent processes and the record of error occurred
during the standby operation.
• For the printed information about "Reprocessing Result" and
"Error Result", refer to Section 4.11, "Printing of the
reprocessing records" on page 130.
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
Prints the latest reprocessing record automatically.
Prints the latest reprocessing record by manual operation of
subcontrol panel.
Prints all of the reprocessing records recorded that day by manual
operation of subcontrol panel.
Prints all the reprocessing records stored in the equipment by
manual operation of subcontrol panel.
Sets the "Automatic Printing function"
Refer to "Automatic Printing setup (Prints the reprocessing
records automatically)" on page 181.
Sets the "Error Result Printout" on each printing option.
Refer to "Error result printout setup (for AUTOMATIC
PRINTING, PRINT TODAY and PRINT ALL)" on page 183.
Description
Explanation