Olympus OER-Pro Operation Manual page 2

Supplement to OER-Pro Instruction Manual
Some functions are unavailable depending on the software version. Check if the software version
number is displayed after the power activation according to Section 4.1, "Power activation and opening
the water faucet". If the software version number is not displayed after the power activation, an older
software version is installed and the following functions are unavailable. For software upgrade, contact
Olympus.
Functions unavailable in older version
Software version number display after the power
activation.
Restarting reprocessing process after the error
code [E93] is displayed.
Print options:
 Automatic printing
 Error history print on the "PRINT TODAY",
"PRINT ALL"
Print format modifications:
 Add start time
Continuous buzzer beep while the error code is
displayed.
Printing function for troubleshooting.
Also, "Test strip forceps (GT867700)" described in Chapter 1, "Checking the Package Contents" may not
be equipped depending on the version of the device. If the device is not equipped with test strip forceps
(GT867700), the following function is unavailable. To obtain the test strip forceps (GT867700), contact
Olympus.
Functions unavailable in older version
Check the concentration of the disinfectant solution
during the reprocessing by using test strip forceps
(GT867700).
Related part in operation manual
Section 4.1, "Power activation and opening the water faucet"
on page 75.
Section 4.9, "Reprocessing" — "When the error code [E93] is
displayed during the alcohol flush process" on page 117.
Section 4.11, "Printing of the reprocessing records":
 Table 4.3 on page 130
 Table 4.4 on page 131
 "AUTOMATIC PRINTING (Prints the reprocessing
records automatically)" on page 133
Section 6.11, "Print function setup" on page 180.
Section 4.11, "Printing of the reprocessing records":
 "PRINT FORMAT (Reprocessing Result)" on page 145
 "PRINT FORMAT (Error Result)" on page 146
 "PRINT FORMAT (PRINT TODAY, PRINT ALL)" on
page 147
Section 8.1, "Troubleshooting guide" — "Error codes and
remedial actions" on page 276.
Section 8.3, "Printing function for troubleshooting" on
page 286.
Related part in operation manual
Section 3.10, "Checking the disinfectant solution concentration
level" — "When checking the concentration of the disinfectant
solution during the reprocessing" on page 63.