Instruction Manuals - Olympus OER-Pro Operation Manual

Important Information — Please Read Before Use

Instruction manuals

10
The instructions for this equipment are divided into two volumes:
"Instructions-Installation Manual", and "Instructions-Operation Manual".
Instructions regarding the preparation of endoscopes prior to placing them in the
OER-Pro are found in "Instructions-Operation Manual".
Each of these manuals contains essential information for using this equipment
safely and effectively. The "Instructions-Installation Manual" describes how to
install the equipment. The "Instructions-Operation Manual" describes how to
operate and maintain the equipment and describes modifications to the manual
endoscope cleaning process that can save the user time and inconvenience, if
the endoscope is going to be subsequently reprocessed using the OER-Pro.
The "List of Compatible Endoscopes/Connecting Tubes <OER-Pro>" identifies
all Olympus model endoscopes that are compatible with the OER-Pro, plus the
specific connecting tube(s) required for each of these endoscope models.
The descriptions in these manuals assume that all endoscopes are reprocessed
in the OER-Pro using both an Olympus-validated detergent and disinfectant.
Contact Olympus to obtain the list of both Olympus-validated disinfectant
solutions and detergents.
Before using this reprocessor, be sure to review all of the above-mentioned
manuals, the safety information provided with Olympus-validated detergents and
disinfectants, and the manuals for all other equipment used in the process.
Always use this equipment as instructed. It might cause unexpected danger if
you don't follow the installation and operation manual. Keep these and all related
instruction manuals and documents in a safe and accessible location.
If you have any questions or comments about any information in these manuals,
please contact Olympus.
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual