ALC FLUSH
Performs alcohol flushing of the endoscope channel. For details, refer to
Section 6.9, "Alcohol flushing" on page 172.
AIR PURGE
Feeds air into the equipment and endoscope channels to remove residual
fluids. For details, refer to Section 6.7, "Air purge" on page 169.
RINSE
Rinses the inside of the equipment and endoscope. For details, refer to
Section 6.8, "Rinsing" on page 170.
INFO
WASH/CYCLE display
Pressing the information select button changes the information displayed on
the subcontrol panel as shown in Table 2.1 .
DIS/DAY display
Pressing the information select button changes the information displayed on
the subcontrol panel as shown in Table 2.1.
TEMP C display
Pressing the information select button changes the information displayed on
the subcontrol panel as shown in Table 2.1.
PROGRAM INFO
LCG USAGE
TOTAL LCG
LOADS
TOTAL CYCLES
YY/MM/DD
H:MIN:SEC
1 Any temperature equal to or higher than 20C (68F) is displayed as
"20C" (68F). "[- -]" is displayed if there is not enough disinfectant solution
in the disinfectant tank to measure the temperature.
Table 2.1
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
WASH/CYCLE
DIS/DAY display
display
Cleaning time
Disinfection time
Cycles
6-digit display
6-digit display
Year
Hour
Chapter 2 Nomenclature and Functions
TEMP C display
Temperature
Days
Month
Minute
1
– –
Day
Second
31