Olympus OER-Pro Operation Manual page 125

1.
Inspect the alcohol tank. If alcohol is still present in the alcohol tank, go to
the procedure of "If the error code [E93] is displayed again after replenishing
alcohol and restarting the alcohol flush process:" described in this section.
2.
Replenish alcohol into the alcohol tank as described in Section 3.6,
"Inspecting and replenishing alcohol" on page 48.
3.
Press START button on the main control panel to restart the reprocessing
process. Then the alcohol flush process restarts and the TIME/CODE
display shows the remaining reprocessing time.
Figure 4.41
4.
When reprocessing is completed, the buzzer beeps and the TIME/CODE
display shows [- -] indicating that the process has ended.
Figure 4.42
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
• If the "Automatic Printing Function" is activated, the printer
automatically prints reprocessing result of completed
reprocessing process after completing the restarted
reprocessing process. For more details on the "Automatic
Printing Function" refer to Section 4.11, "Printing of the
reprocessing records" on page 130.
Chapter 4 Reprocessing Operations
119