Display The Total Cycle Count Of The Equipment; Display Of The Total Number Of Times The Disinfectant Solution Was Loaded - Olympus OER-Pro Operation Manual

Chapter 6 Other Functions
6.5 Display of the total number of times the
disinfectant solution was loaded
6.6

Display the total cycle count of the equipment

168
6.
Press the INFO SET button on the subcontrol panel to finish the setting.
Figure 6.19
The equipment can display the total number of times disinfectant solution was
loaded into the OER-Pro.
Press the INFO SEL button on the subcontrol panel to select "TOTAL LCG
LOADS". The subcontrol panel displays the total number of disinfectant solution
loading used in 6 digits.
The total number of times disinfectant solution was loaded is
counted automatically. It cannot be set by the user.
The equipment can display the total number of reprocessing cycles executed.
Press the INFO SEL button on the subcontrol panel to select "TOTAL CYCLES".
The subcontrol panel displays the total number of reprocessing operations in
6 digits.
The total number of operations is counted automatically. It
cannot be set by the user.
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual