AUTOMATIC PRINTING (Prints the reprocessing records
automatically)
Prints the latest reprocessing
record automatically.
can be printed as standard function
Table 4.5
1 For setting of "AUTOMATIC PRINTING", refer to Section 6.11, "Print
function setup" on page 180.
2 For setting of Error Result Printout, refer to Section 6.11, "Print function
setup" on page 180.
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
Description
1
•
"Reprocessing Result" is the record provided for a completed
reprocessing process. For the printed information about
"Reprocessing Results", refer to "PRINT FORMAT
(Reprocessing Result)" on page 145.
•
"Error Result" is the record provided when an error is
encountered during a reprocessing process, which result in
an incomplete reprocessing process. For the printed
information about "Error Results", refer to "PRINT FORMAT
(Error Result)" on page 146.
•
The print function can print completed reprocessing cycles or
error codes that occur during the reprocessing cycle. It
cannot print the record of completed/incomplete
sub-independent processes and the record of error occurred
during the standby operation. For details on the print function
of error result, see Table 4.6.
Chapter 4 Reprocessing Operations
Subjects of printout
Reprocessing
Results
–
can be printed as optional function
Error Results
–
2
133