Important Information — Please Read Before Use
16
•
To avoid electromagnetic interference from other equipment,
do not install any other electrical devices in close proximity to
this equipment (aside from ancillary devices used with this
equipment).
•
This equipment enables radio communication by RFID and
emits RF (radio frequency) energy to perform the said
intended functions. It may cause electromagnetic
interference in nearby electronic equipment, and is labeled
with the symbol below. If electromagnetic interference
occurs, mitigation measures may be necessary, such as
moving the electronic equipment away, reorienting or
relocating this instrument, or shielding the location. An
electromagnetic interference with other devices may shorten
the communications distance of the designated ID tag and
cause signals to become unreadable. Try to take mitigation
measures such as keeping the affecting device away from
this equipment.
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual