Olympus OER-Pro Operation Manual page 160

Chapter 5 End-of-Day Checks
154
4.
Clean the fluid level sensor using a soft cloth moistened with 70% ethyl
alcohol or isopropyl alcohol.
Figure 5.6
5.
Wipe away all moisture from the fluid level sensor using a clean soft cloth.
6.
Clean the fluid level sensor covers (upper, lower) in running water and
remove moisture.
7.
Attach the fluid level sensor covers (upper, lower) to their original positions
around the fluid level sensor.
Figure 5.7
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual