Prepare A Beaker Or Similar Container And Pour More Than 50 Ml Of The Sterile Water Into It; Put The Cap In The Container Filled With The Sterile Water (See Figure 7.90) - Olympus OER-Pro Operation Manual

Chapter 7 Routine Maintenance
254
12.
Put the detached cap in the container of the disinfectant solution (see Figure
7.90).
13.
To fill the detergent supply pipe with the disinfectant solution, connect the
tube attached to the syringe to the detergent nozzle and repeat the suction
operation with the syringe until the disinfectant solution comes out of the
tube. During this process, do not let the air come into the detergent supply
pipe (see Figure 7.89).
14.
Wait until the necessary time for disinfection passes. Refer to the
documentation supplied with the disinfectant solution for specifics regarding
disinfection.
15.
When the disinfection time ends, take the cap out of the container filled with
the disinfectant solution.
16.
To remove disinfectant solution from inside the line, connect the tube
attached to the syringe to the detergent nozzle and suction the disinfectant
solution with the syringe until no more disinfectant solution comes out of the
line (see Figure 7.89).
17.
Prepare a beaker or similar container and pour more than 50 ml of the
sterile water into it.
18.

Put the cap in the container filled with the sterile water (see Figure 7.90).

19.
To rinse the line, connect the tube attached to the syringe to the detergent
nozzle and suction more than 50 ml of sterile water with the syringe (see
Figure 7.89).
20.
Attach the cap to the detergent tank and close the detergent/alcohol drawer
(see Figure 7.91).
Figure 7.91
21.
To remove rinse water from inside the line and fill it with detergent, connect
the tube attached to the syringe to the detergent nozzle and suction more
than 50 ml of detergent with the syringe (see Figure 7.89).
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual