Dangers, Warnings, And Cautions - Olympus OER-Pro Operation Manual

Endoscope reprocessor
Hide thumbs Also See for OER-Pro:
Table of Contents

Advertisement

Dangers, warnings, and cautions

ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
Follow the dangers, warnings, and cautions given below when handling this
equipment. This information is supplemented by the dangers and warnings given
in each chapter.
Do not insert an EndoTherapy accessory or other object
through an opening including the air vent of the equipment.
Also, do not allow any liquid (including water or disinfectant
solution) to flow into an opening. Contact with an electrical
part inside the equipment could cause an electric shock or
equipment failure.
Always remove the tank from the detergent/alcohol drawer
before putting detergent or alcohol in the tank. If detergent or
alcohol is spilled on the detergent/alcohol drawer, it could get
inside the equipment and contact an electrical part inside,
causing an electric shock or fire hazard.
Do not install this equipment in any place where any of the
following are present.
 High oxygen concentration
 Oxidizing substance such as Nitrous Oxide (N
 Flammable anesthetic gas
This equipment is not explosion-proof and may explode or
cause fire under these conditions.
Always use the power cord provided with this equipment.
Otherwise, equipment failure or power cord burnout may
result. Also, remember that the provided power cord is for
use only with this equipment and should not be used with any
other equipment.
Do not press any of the switches on the main or subcontrol
panel of this equipment with a pointed or hard object.
Otherwise, the switch may be damaged.
Be sure to turn off the water faucet and the power switch of
the equipment at the end of the day to avoid potential water
leaks.
To avoid malfunctions, do not use this equipment in a dusty
environment.
Important Information — Please Read Before Use
O)
2
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents