Inspecting The Printer Paper Roll - Olympus OER-Pro Operation Manual

Chapter 3 Inspection Before Use

3.11 Inspecting the printer paper roll

68
Do not start printing if the end of the printer paper roll is not
projecting from the opening on the printer cover. Otherwise,
the printer paper roll may jam and/or printing may fail.
1.
Confirm that the end of the printer paper roll is projecting from the opening
on the printer cover. If not, open the printer cover, unroll about 10 cm of
paper and pass it through the opening.
Figure 3.34
2.
Close the printer cover and cut any excess paper projecting from the
opening.
Figure 3.35
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual