Olympus OER-Pro Operation Manual page 188

Chapter 6 Other Functions
182
3.
After pressing the "
lamp of subcontrol panel starts to blink for indicating the current setting of
"AUTOMATIC PRINTING". Make sure the indication of function lamp on the
subcontrol panel and determine the setting of "AUTOMATIC PRINTING" in
accordance with the description of Table 6.10. If you want to change the
setting, keep pressing the "
function lamp of the subcontrol panel to start blinking. This indicates that
"AUTOMATIC PRINTING" has been deactivated. The setting will be
changed every 5 seconds by rotation.
Panel display of sub-control panel
When "PRINT LAST" lamp blinks
When "PRINT TODAY" lamp blinks
Table 6.10
The "Automatic printing function" is set to "Activated" at the
factory.
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
" button for 5 seconds, the "PRINT LAST" function
" button and wait for the "PRINT TODAY"
Setting of
AUTOMATIC PRINTING
Activated
Deactivated