Olympus OER-Pro Operation Manual page 92

Chapter 4 Reprocessing Operations
For internal ID-type endoscope
(180 series endoscope)
1
190 series endoscopes may not be available in some areas.
86
1.
Hold the internal ID-type endoscope connector or the external ID tag to the
RFID reader of the equipment, and scan the tag with the reader until a short
beep sounds.
Scope ID mark
For internal ID-type endoscope
(190 series endoscope
Figure 4.6
2.
Make sure that the Scope ID detection indicator on the main control panel
lights up.
Figure 4.7
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
For external ID tag
1
)
RFID
Approach the Scope ID mark
on the endoscope connector of
1
190 series to the RFID
reader of the equipment.