Chapter 4 Reprocessing Operations
Error occurred
Print Option
during reprocessing
AUTOMATIC
PRINTING
PRINT LAST
PRINT TODAY
PRINT ALL
140
Error occurred when
reprocessing cycle
cycle
(ex. E12, E31, E91)
Print option can print out the
subject error result
Table 4.10
1.
Press the FUNC SEL button on the subcontrol panel to select "PRINT
TODAY".
2.
Press the FUNC START button on the subcontrol panel. The printer prints
the results of the day's reprocessing events in reverse order, beginning with
the most recent.
Only the results of successfully completed reprocessing
events are printed. The results of processes that were
aborted due to an error code are not printed out.
Figure 4.55
3.
The buzzer beeps and paper feed stops when printing is finished. Cut the
printed part of paper and ensure that information is printed correctly.
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
starting
Error occurred when
in standby
–
–
–
–
Error occurred
sub-independent
process
–
–
–
–
Print option cannot print out the
subject error result
during
–
–
–
–