Table of Contents
Advertisement
Quick Links
INSTRUCTIONS
SZX-SDO2
FOR SZX10/SZX7
Side-by-side viewing attachment
This instruction manual is for the Olympus SZX-SDO2 side-by-side viewing attachment. To
ensure the safety, obtain optimum performance and familiarize yourself fully with the use
Optical Microscope Accessory
of this attachment, we recommend you study this manual thoroughly before operating the
attachment.
Retain this instruction manual in an easily accessible place near the work desk for future
reference.
For details of products other than SZX-SDO2, see "1 Nomenclature" (P.3).
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Olympus SZX-SDO2
Summary of Contents for Olympus SZX-SDO2
- Page 1 SZX-SDO2 FOR SZX10/SZX7 Side-by-side viewing attachment This instruction manual is for the Olympus SZX-SDO2 side-by-side viewing attachment. To ensure the safety, obtain optimum performance and familiarize yourself fully with the use Optical Microscope Accessory of this attachment, we recommend you study this manual thoroughly before operating the attachment.
- Page 2 Refer to your local Olympus distributor in EU for return and/or collection systems available in your country. NOTE: This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
-
Page 3: Table Of Contents
SZX-SDO2 Contents Correct assembly and adjustments are indispensable for the microscope to manifest its full performance. If you want to assemble the microscope by yourself, see “5 Assembly” (P.12) first. Important ................................1 1 Nomenclature ............................3 2 Controls ................................4 3 Operation ............................... -
Page 5: Important
SZX7 microscope and associated options, make sure that you have carefully read and understood the corresponding manuals, and that you understand how the various components of the microscopic system are used together. 2. The SZX-SDO2 attachment is a precision instrument. Handle it with care and avoid subjecting it to sudden or severe impact. - Page 6 Safety symbols The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment in the safest possible manne Symbol Explanation Before use, carefully read the instruction manual. Improper use could result in personal injury and/or damage to the equipment.
-
Page 7: Nomenclature
SZX-SDO2 Nomenclature If you have not yet completed the assembly of the microscope yet, see “5 Assembly” (P.12) first. Observation tube SZX2-TR30/SZX2-TR30PT/SZX2-TTR/ SZX2-TR30/SZX2-TR30PT/SZX2-TTR/ SZX2-TTRPT/SZX-BI30/SZX-BI45 SZX2-TTRPT/SZX-BI30/SZX-BI45 Side-by-side viewing attachment Side-by-side viewing attachment SZX-SDO2 SZX-SDO2 Primary observer side Secondary observer side Secondary observer side... -
Page 8: Controls
Controls Side-by-side viewing attachment SZX-SDO2 Secondary observer observation tube mount Primary observer observation tube mount AC adapter input connector Focusing assembly mount Pointer brightness control (P.8) OFF/continuous light control Mount Pointer color switching lever (P.8) Top position: Red, Middle position: Light shielded,... - Page 9 SZX-SDO2 AC adapter Input connector Input connector Output plug Large base SZX2-STL2 Pillar SZH-P400 SZH-P400 Pillar support mount mounting screw holes* Pillar support Allen wrench Stage adapter mounting screw holes** Stage adapter mounting screw holes** The SZX-STAD1, SZH-STAD1, etc. can be mounted.
- Page 10 For transmitted light observation, the SZX2 LED transmitted light illumination base b ( SZX2-ILLTQ/ILLTS ) can be placed on the top of the SZX2-STL2 a as shown below. In this case, the height of the base surface is raised for the same amount as the height of the transmitted light illuminator.
-
Page 11: Operation
SZX-SDO2 Operation 3 -1 Focus adjustment Focusing at the primary observer position Turn the pointer brightness control a of the discussion attachment clockwise to turn on the pointer ( Set the pointer color switching lever b to other position than the middle position. If the pointer cannot be seen in the field of view, move the pointer at the center of field using the pointer control lever c . -
Page 12: Using The Pointer
3 -2 Using the pointer Adjusting the pointer brightness Light intensity alignment range of the pointer has been set to comply with a dark specimen, such as the case of fluorescence observation. For this reason, in case of brightfield observation with high light illumination, you may feel it difficult to identify the pointer even by rotating the pointer brightness control dial which is not defect of this product. -
Page 13: Other
In general, the procedure for taking photographs (including digital camera photographs) is the same as usual. This section describes special considerations that apply when taking photographs with the SZX-SDO2 attachment installed. 1. Provided that the primary observer’s position is on the left side, you can take photographs that include the pointer using a trinocular observation tube. -
Page 14: Specifications
Specifications Side-by-side viewing attachment SZX-SDO2 Item Specification 1. Distance between primary and 650 mm parallel (side by side) secondary observer tubes 2. Image orientation Same at primary and secondary observers´ positions (erect image) 3. Eyepoint height Same at primary and secondary observers´ positions 4. - Page 15 SZX-SDO2 Large base SZX2-STL2 Item Specification Size 500 x 350 mm 1. Base Pillar locations Height 400 mm (from base top surface) 2. Pillar -0.020 External diameter 32 mm dia., f 7 -0.041 Clamping onto base top surface using screws.
-
Page 16: Assembly
Side-by-side viewing attachment SZX-SDO2 AC adapter Mount Power cord Pillar Microscope body SZX2-ZB10 SZX-ZB7 Required Tools Allen wrench (Large) Large base (Provided with the SZX-SDO2) SZX2-STL2 Allen wrench (Provided with the large base) Allen screwdriver (Provided with the microscope body) -
Page 17: Detailed Assembly Procedure
SZX-SDO2 5 -2 Detailed assembly procedure Mounting the pillar When the primary observer is to sit on the right side, the pillar support should be moved to the left side. Using the Allen wrench (3 mm across flats) provided with the base, fully loosen the 2 pillar support clamping screws a . - Page 18 Allen wrench. Place the cap a in the original position. Place the SZX-SDO2 side-by-side viewing attachment on the mount d so that the secondary observer´s position is on the right side (as shown in figure).
- Page 19 SZX-SDO2 Mounting the microscope body Remove the objective beforehand to prevent it from CAUTION being damaged by falling out during installation of the microscope body. Also be sure to hold the microscope body firmly until it has been clamped securely.
- Page 20 · Always use the power cord and AC adapter provided by Olympus. If no power cord is provided with the microscope, please select the proper power cord by referring to section “PROPER SELECTION OF THE POWER SUPPLY CORD” at the end of this instruction manual.
- Page 21 If no power supply cord is provided, please select the proper power supply cord for the equipment by referring to “Specifications” and “Certified Cord” below: Caution : In case you use a non-approved power supply cord for Olympus products, Olympus can no longer warrant the electrical safety of the equipment.
- Page 22 Table 2 HAR flexible cord Approval organizations and cordage harmonization marking methods Alternative marking utilizing Printed or embossed black-red-yellow thread (Length harmonization marking (May be of color section in mm) Approval organization located on jacket or insulation of internal wiring) Black Yellow Comite Electrotechnique Belge...
- Page 24 Manufactured by Shinjuku Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0914, Japan Distributed by AX7748 09 Issued in March, 2019...
Need help?
Do you have a question about the SZX-SDO2 and is the answer not in the manual?
Questions and answers