Olympus OER-Pro Operation Manual page 271

32.
Turn the connection ring on the equipment side of the water supply hose in
the direction shown to disconnect the hose from the equipment. If residual
water spills from the water supply hose, wipe it up with a clean cloth.
Figure 7.108
33.
Put the equipment-side end of the hose in the wide-mouthed container to
collect any residual water that may flow from the water supply hose.
34.
While holding the lock lever of the water supply socket of the water supply
hose, pull the sleeve toward the hose to disconnect the water supply socket
from the water faucet.
(3)
Figure 7.109
35.
Step on the foot pedal to open the lid, dry the reprocessing basin thoroughly
so that no bacterial growth will occur inside it, and then close the lid.
36.
Disconnect the power cord plug from the hospital-grade power outlet.
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
The numbers in the figure
indicate the sequence for
disconnecting the water
supply socket.
(2)
(1)
Chapter 7 Routine Maintenance
265