Setting The Disinfection Cycle And Day Counter - Olympus OER-Pro Operation Manual

Chapter 6 Other Functions

Setting the disinfection cycle and day counter

166
1.
Check the concentration of the disinfectant solution before each use by
using the test strip (see Section 3.10, "Checking the disinfectant solution
concentration level" on page 59).
2.
When the disinfectant has been identified as no longer effective, press the
INFO SEL button on the subcontrol panel to select "LCG USAGE", and then
press the INFO SET button. The WASH/CYCLE display starts to blink.
Figure 6.15
3.
Press the " " or "
operation count.
Set [- -] if you do not want to set the disinfection cycle count.
Figure 6.16
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
" button on the subcontrol panel to set the disinfection