Subcontrol panel
FUNCTION
The lamp corresponding to
the selected function lights.
For details, refer to
"FUNCTION" on page 30.
FUNC SEL button
Press this button to select
a function.
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
INFO SEL button
Press this button to select the
information to be displayed.
FUNC START button
Press this button to start
the selected function.
Chapter 2 Nomenclature and Functions
Subcontrol panel
INFO
The lamp corresponding to the
selected information lights and the
details are displayed. For details,
refer to "INFO" on page 31.
Set "
"/"
Press these buttons to set
the program details, date,
and time. "
used for setting the printing
functions. For details on the
print function setting, refer to
Section 6.11, "Print function
setup" on page 180.
" buttons
" button is also
29