Header Area - Baumer OX200 Operating Manual

8 | Web interface description
8.2.1

Header area

The header area is located in the top section of the user interface. The header is always visible,
independent of the mode you are in at the time.
OX200
Expert Mode
Parameter Setup
Unsaved Parameters
EN
74
Sensor denomination
n
Activation/deactivation of the expert mode.
n
In the expert mode, more complex functions and parameters
n
become visible that require a deeper understanding of meas-
urement physics and the applied algorithm. The expert mode
can be activated and deactivated at any time.
Call up the context help.
n
Select the desired parameter setup.
n
Changes take effect immediately. However, the changes must
n
be stored in the parameter setup to be available after a restart
of the sensor.
Message that a change has not been stored yet.
n
Button for requesting support via e-mail.
n
Display of sensor type and serial number.
n
Link to the Baumer website.
n
Selection of the language of the user interface.
n
Operating Manual
Baumer
OX200 | V2