Xerox VersaLink B7025 Service Manual page 1275

All the Xerox® VersaLink® B7025/B7030/B7035 machine configurations feature a bypass tray
(Tray 5), PL 70.30. The machine can also be configured with an optional high capacity feeder
(HCF), PL 70.45 and Figure 3.
Tray 5 (Bypass tray)
Figure 3 Media supply trays
The HCF can only be installed on machines configured with either a 1TM, 3TM or TTM,
Figure 4 High capacity feeder
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Tray 1
Tray 2
Tandem Tray Module
(TTM - Trays 3 and 4)
Tray 4
Tray 3
Figure
High Capacity Feeder
An optional envelope tray is available,
customer in the tray 1 position. Refer to
4.
Envelope tray
Supported Media
Refer to GP 15 for the paper and media size specifications of the various paper trays.
Paper Tray Elevation and Feeding: Trays 1, 2, 3 and 4
NOTE: The elevation mechanism is similar trays 3 and 4 of the TTM but on different on the
HCF.
Refer to the relevant sections:
• Tandem Tray Module (TTM): Tray 3
• Tandem Tray Module (TTM): Tray 4
• High Capacity Feeder (HCF) (Tray
Paper trays 1, 2, 3 and 4 all have similar paper elevator systems that lift the paper stack into
the paper feed position. The paper feed side of a hinged bottom plate is raised by a lift shaft
until the paper stack is at the correct height to feed the top sheet of paper,
drops mechanically when the tray is opened as the gears disengage.
April 2017
8-29
PL 70.100 Item 1. The envelope tray is installed by the
Figure 5.
Figure 5 Envelope tray
components.
Components.
6).
Product Technical Overview
Figure 6. The tray