Xerox VersaLink B7025 Service Manual page 1282

As drive is provided to the nudger roll lowers just enough to contact and pick up the media. The
paper stopper is unlocked and media feed enabled,
No paper sensor actuator
Figure 19 Bypass feed components
High Capacity Feeder (HCF) (Tray 6)
The HCF feature (optional) is used as a high capacity media supply and is primarily loaded
with 8.5x11 or A4 paper. The capacity of the HCF is 2000 sheets of 80gsm (20lb) paper,
4.
For detailed media information refer to GP 15
Product Technical Overview
Figure 19.
Feed Roll
Paper stopper
Feed roll shaft
Paper and Media Size Specifications.
High Capacity Feeder: Sensors and Interlocks
The HCF side out switch detects if the HCF is in the home position (against the left side of the
device) following jam clearance. During jam clearance, the operator may need to slide the HCF
to the left, away from the machine,
Refer to Figure 20. The HCF top cover interlock switch cuts +24VDC power to the K1 relay on
the HCF PWB, PL 70.60 Item
Item 23, and the takeaway motor,
Refer to Figure 21. The HCF tray in sensor detects that the HCF drawer is in the operating
position. This prevents the HCF feed/lift motor,
drawer open.
Figure
April 2017
8-36
Figure 20.
9, when opened, turning off the HCF feed/lift motor,
PL 70.60 Item 7.
PL 80.60 Item 23, from operating with the
HCF top cover interlock switch
HCF side out switch
Figure 20 HCF Interlocks
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
PL 80.60
Launch Issue