Rep 12.2 H Transport Belt - Xerox DocuColor 1632 Service Manual

REP 12.2 H Transport Belt

Parts List on PL 17.4
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Remove the H Transport Assembly
2. Remove the following parts:
a. H Transport Front Cover (PL 17.3)
b. H Transport Rear Cover (PL 17.3)
c. Stop (PL 17.3)
3. Remove the H Transport Cover (Figure
1
Remove
Screw (2)
Figure 1 Removing the H Transport Cover
Repairs and Adjustments
REP 12.2
WARNING
(REP 12.1).
1).
2
Remove
Cover
4. Remove the Gate In Solenoid Assembly
1
Disconnect Wires
as required
Figure 2 Removing the Gate In Solenoid Assembly
6/02
4-100
(Figure 2).
2
Remove
Screws (2)
3
Remove Sole-
noid Assembly
Prelaunch Training/Review
DC1632/2240