REP 4.13 Paper Drive Roll
Parts List on
PL 4.5
Removal
1.
Switch off the printer, then disconnect the power cord.
2.
Remove the following covers:
a.
The Front Cover,
REP
2.1.
b.
The Middle Cover,
REP
2.5.
3.
Disconnect connector CN6 from the HVPS PWB, and route the wires through the frame,
Figure
1.
CN6
Figure 1 HVPS CN6
Repairs / Adjustments
REP 4.13
4.
Remove five screws attaching the Main Drive Unit, move the Fuser Drive Locking Lever
(right) to the unlock position, then remove the Main Drive Unit,
July 2019
4-40
Figure
Screws
Locking Lever
Figure 2 Main Drive Unit
Xerox® B205/B215 Multifunction Printer Service Manual
2.
Initial Release