REP 9.1 Toner Dispense Motor
Parts List on PL 4.20
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
1.
Remove the main drive assembly, REP 4.1.
2.
Remove the toner dispense motor, Figure 1.
3
Remove the motor from
the bracket.
2
Remove the motor
and bracket.
1
Remove 4 screws.
Figure 1 Toner dispense motor removal
Replacement
Replacement is the reverse of the removal procedure.
WorkCentre 4150
REP 9.2 Xerographic Module Connector and CRUM PWB
Parts List on PL 4.15
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
1.
Remove the main drive assembly, REP 4.1.
2.
Remove the xerographic module connector, Figure 1.
4
Carefully disconnect the connector.
September 2006
4-41
WARNING
WARNING
CAUTION
3
Remove the xerographic
module connector.
2
Remove the connector
holder.
1
Remove 4 screws.
Figure 1 Connector removal
Repairs and Adjustments
REP 9.1, REP 9.2