Chrysler Conquest 1988 Service Manual page 226

____~.
6-6
CLUTCH
- Service Adjustment Procedures
BLEEDING
Whenever the clutch tubing, the clutch hose, and/or the clutch
master cylinder have been removed, or if the clutch pedal is
spongy, bleed the system.
1. Loosen the bleeder screw~at the clutch release
-cylinder.
2. Push clutch pedal down slowly until all air is expelled.
3. Hold clutch pedal down until bleeder screw is ret&htened.
4. Refill clutch master cylinder with specified clutch fluid.
Caution
Use the specified clutch fluid only.
Specified clutch fluid: MOPAR Brake Fluid Part No.
2933249 or equivalent