Port D Input Function Enable Control Register - Pdiner - Holtek HT32F12345 User Manual

32-Bit Arm ® Cortex ® -M3 MCU
HT32F12345
Port D Input Function Enable Control Register – PDINER
This register is used to enable or disable the GPIO Port D input function.
Offset: 0x004
Reset value: 0x0000_0000
31
Type/Reset
23
Type/Reset
15
Type/Reset
7
Type/Reset
Bits Field
[2:0] PDINENn
Rev. 1.10
30 29 28
22 21 20
14 13 12
6 5
Reserved
Descriptions
GPIO Port D pin n Input Enable Control Bits (n = 0 ~ 2)
0: Pin n input function is disabled
1: Pin n input function is enabled
When the pin n input function is disabled, the input Schmitt trigger will be turned off
and the Schmitt trigger output will remain at a zero state.
151 of 590
27 26
Reserved
19 18
Reserved
11 10
Reserved
4 3 2
RW
25 24
17 16
9 8
1 0
PDINEN
0 RW 0 RW 0
November 28, 2018