MECHANICAL
PREPARATION FOR OVERHAUL
11 .Preparation for Overhaul
A: PROCEDURE
1) After removing the engine from the body, secure
it in the ST shown below.
ST1 498457000
ENGINE STAND ADAPTER
ST2 4984571 00
ENGINE STAND ADAPTER
ST3 49981 71 00
ENGINE STAND
RH
LH
B2M2582A
2) In this section the procedures described under
each index are all connected and stated in order. It
will be the complete procedure for overhauling of
the engine itself when you go through all steps in
the process.
Therefore, in this section, to conduct the particular
procedure within the flow of a section, you need to
go back and conduct the procedure described pre-
viously in order to do that particular procedure.
ME(S0HC)-42