Atf Cooler Pipe And Hose - Subaru IMPREZA 2002 Service Manual

I
ATF COOLER PIPE AND HOSE
AUTOMATIC TRANSMISSION
21 .ATF Cooler Pipe and Hose
A: REMOVAL
1) Set the vehicle on the lift.
2) Lift-up the vehicle.
3) Remove the under cover.
4) Disconnect the ATF cooler hose from radiator.
NOTE:
Do not remove with a screwdriver or other point-
ed tools.
When the hose is difficult to remove, wrap a shop
cloth around the hose to protect it. Turn it with pli-
ers, and then pull directly out with your hand.
1. NON-TURBO MODEL
c-
S2M0895
5) Disconnect the ATF cooler hoses from pipes.
NOTE:
Do not remove with a screwdriver or other point-
ed tools.
When the hose is difficult to remove, wrap a shop
cloth around the hose to protect it. Turn it with pli-
ers, and then pull directly out with your hand.
6) Remove the ATF cooler pipe from cylinder head.
7) Remove the oil cooler inlet and outlet pipes.
CAUTION:
When removing the outlet pipe, be careful not
to lose the ball and spring used with retaining
screw.
(A) Inlet pipe
(B) Outlet pipe
AT-47