Subaru Legacy 2002 Service Manual page 1160

6) Install timing chain. <Ref. to ME(H6)-43,
INSTALLATION, Timing Chain Assembly.>
7) Install front chain cover. <Ref. to ME(H6)-40,
INSTALLATION, Front Chain Cover.>
8) Install V-belt.
INSTALLATION, V-belt.>
9) Install radiator.
INSTALLATION, Radiator.>
10) Fill coolant. <Ref. to CO(H6)-18, FILLING OF
ENGINE COOLANT, REPLACEMENT, Engine
Coolant.>
C: INSPECTION
1. TIP CLEARANCE
Measure the tip clearance of rotors. If the clear-
ance exceeds the limit, replace rotors as a
matched set.
Tip clearance:
Standard
0.04 — 0.14 mm (0.0016 — 0.0055 in)
Limit
0.20 mm (0.0079 in)
2. CASE CLEARANCE
Measure the clearance between the outer rotor
and the rear chain cover rotor housing. If the clear-
ance exceeds the limit, replace the rotor.
Case clearance:
Standard
0.11— 0.18 mm (0.0043 — 0.0071 in)
Limit
0.25 mm (0.0098 in)
<Ref. to ME(H6)-29,
<Ref. to CO(H6)-24,
S148070A10
S148070A1001
B2M4538
S148070A1002
B2M4540
LU(H6)-13
OIL PUMP
3. SIDE CLEARANCE
Measure clearance between oil pump inner rotor
and rear chain cover. If the clearance exceeds the
limit, replace rotor or pump body.
Side clearance:
Standard
0.02 — 0.08 mm (0.0008 — 0.0031 in)
Limit
0.15 mm (0.0059 in)
4. OIL PUMP CASE
Check the oil pump case for worn shaft hole,
clogged oil passage, cracks and other faults.
Lubrication
S148070A1003
B2M4539
S148070A1004