Subaru Legacy 2002 Service Manual page 1139

Cooling
12) Install under cover.
13) Lower the vehicle.
14) Connect battery ground cable.
15) Fill coolant. <Ref. to CO(H6)-18, FILLING OF
ENGINE COOLANT, REPLACEMENT, Engine
Coolant.>
16) Check ATF level.
REPLACEMENT, Automatic Transmission Fluid.>
C: INSPECTION
1) Remove radiator cap, top off radiator, and
attach tester to radiator in place of cap.
2) Apply a pressure of 157 kPa (1.6 kg/cm
psi) to radiator to check if:
(1) Engine coolant leaks at/around radiator.
(2) Engine coolant leaks at/around hoses or
connections.
CAUTION:
¼ Engine should be off.
¼ Wipe engine coolant from check points in
advance.
RADIATOR
B2M2920
G6M0095
<Ref. to AT-9,
S146058A10
B2M4441
2
CO(H6)-26
¼ Be careful to prevent engine coolant from
spurting out when removing tester.
¼ Be careful also not to deform filler neck of
radiator when installing or removing tester.
, 23