Cooling Fan, Hose And Connections; Engine Coolant - Subaru Crosstrek Hybrid 2022 Owner's Manual

type, the maintenance interval is
shortened to that of the mixing
coolant.
. Do not splash the engine coolant
over painted parts. The alcohol
contained in the engine coolant
may damage the paint surface.
& Cooling fan, hose and con-
nections
Your vehicle employs an electric cooling
fan which is thermostatically controlled to
operate when the engine coolant reaches
a specific temperature.
If the radiator cooling fan does not operate
even when the coolant temperature high
warning light blinks or illuminates in RED,
the cooling fan circuit may be defective.
Refer to "Coolant temperature high warn-
ing light" FP198.
Check the fuse and replace it if necessary.
Refer to "Fuses" FP454.
If the fuse is not blown, have the cooling
system checked by your SUBARU dealer.
If the frequent addition of coolant is
necessary between vehicle service visits,
it is recommended that you have your
vehicle inspected by an authorized
SUBARU dealer to check for leaks, da-
mage, or looseness.
& Engine coolant
! Checking the coolant level
WARNING
Never remove the radiator cap until
the hybrid system has been shut off
and has cooled down completely.
Since the coolant is under pressure,
you may suffer serious burns from a
spray of boiling hot coolant when
the cap is removed.
1) "FULL" level mark
2) "LOW" level mark
Cooling system
Check the coolant level at each fuel stop.
1. Check the coolant level on the outside
of the reservoir while the engine is cool.
2. If the level is close to or lower than the
"LOW" level mark, add coolant up to the
"FULL" level mark. If the reserve tank is
empty, remove the radiator cap and refill
coolant up to just below the filler neck as
shown in the following illustration.
1) Fill up to this level
– CONTINUED –
429