Rear Exhaust Pipe - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

3. Rear Exhaust Pipe

1) Separate rear exhaust pipe from front exhaust

Be careful, exhaust pipe is hot.

2) Separate rear exhaust pipe from muffler.

Be careful not to pull down rear exhaust pipe.

3) Remove rear exhaust pipe.

B: INSTALLATION

Replace gaskets with new ones.

1) Install rear exhaust pipe to muffler.

Tightening torque:

48 N·m (4.9 kgf-m, 35.4 ft-lb)

REAR EXHAUST PIPE

2) Install rear exhaust pipe to front exhaust pipe.

Tightening torque:

18 N·m (1.8 kgf-m, 13.0 ft-lb)

C: INSPECTION

1) Make sure there are no exhaust leaks from con-

nections and welds.

2) Make sure there are no holes or rusting.

Table of Contents