Subaru Legacy 2002 Service Manual page 1110

6) Tighten bolts which install front exhaust pipe to
rear exhaust pipe.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
7) Tighten bolt which holds front exhaust pipe
assembly to hanger bracket.
Tightening torque:
35 N·m (3.6 kgf-m, 26.0 ft-lb)
8) Connect rear oxygen sensor connector.
9) Install under cover.
FRONT EXHAUST PIPE
10) Lower the vehicle.
11) Connect front oxygen (A/F) sensor connec-
tors.
B2M4409
12) Install air cleaner case and air intake duct.
<Ref. to IN(H6)-5, INSTALLATION, Air Cleaner.>
and <Ref. to IN(H6)-7, INSTALLATION, Air Intake
Duct.>
13) Install battery.
B2M4411
C: INSPECTION
1) Make sure there are no exhaust leaks from con-
nections and welds.
2) Make sure there are no holes or rusting.
B2M4408
EX(H6)-7
Exhaust
B2M4407A
S142065A10